Indoor air sampling
A pump draws a measured volume of air, often about 15 liters per minute for five to ten minutes, through a spore trap cassette. The lab counts and identifies spores per cubic meter.
Whether you're dealing with a landlord, a home sale, or a family member who feels worse indoors, call Breffni Remediation. We'll connect you with an independent mold tester in Denver who gets you lab results you can stand behind.
Not every situation needs a lab. But when there's a dispute, a sale, or a health question, numbers from an accredited lab settle arguments that eyeballing can't.
Answered day and night, holidays too.

Testing only helps if it's done right and interpreted honestly. Here's what you can expect.

Testers use calibrated air pumps with spore trap cassettes, sterile swabs, and tape-lift slides, and always pull an outdoor control sample for comparison.
Pricing is set per sample before the visit. No surprise lab charges after the results come back.
Calls are answered 24/7 and routed to a tester near Denver. Standard lab results usually come back in two to three business days, with rush options available.
Insurance, licensing where required, and accredited lab partners are the baseline we look for in every independent tester.
The right test depends on what you're trying to prove. These are the common options.
A pump draws a measured volume of air, often about 15 liters per minute for five to ten minutes, through a spore trap cassette. The lab counts and identifies spores per cubic meter.
Clear tape or a sterile swab picks up material from a suspicious stain so the lab can confirm whether it's mold and which genus it is.
A small port lets the tester sample air inside a wall without opening it, which is useful when you suspect growth behind finished drywall after a leak.
Clearance testing gives you proof the remediation worked before walls are closed up or tenants move back in.
When two sides disagree about mold, accredited lab results with proper paperwork are hard to argue with.

Straightforward, start to finish.
Tell us why you want testing: a smell, symptoms, a dispute, a sale, or clearance after removal. The goal decides which samples make sense.
Samples are collected indoors and out, sealed, labeled, and logged on a chain-of-custody form.
The lab analyzes the samples on a standard or rush schedule, at the price you agreed to before the visit.
The tester walks you through the results, compares indoor and outdoor counts, and gives a clear recommendation.

Call and we'll connect you with an independent tester near Denver who can sample this week.
Call +1-844-326-4757 Now
A few recent testing jobs, in customers' own words.

My landlord kept saying the spots in my bedroom were just dirt. The lab confirmed two types of mold on the wall, and the air sample was well above outdoor levels. That report got the repair done.
After paying for remediation, I wanted proof. The clearance air samples came back lower than the outdoor control, and I finally felt comfortable moving my kids back into the basement.
We were selling and the buyer asked about a past leak. One wall cavity sample and an air test showed nothing unusual, and the deal closed on time.
He walked me through every number on the report instead of just emailing a PDF. Knowing what was normal versus elevated made the whole thing less stressful.
Air sampling measures spores floating in a room compared with outdoor air. Surface sampling identifies what's growing on a specific spot. Many situations call for one or the other, not both.
Mold spores are always present outdoors. The outdoor control sets a baseline, so indoor results can be judged by whether they're higher or contain different types than outside.
Standard lab turnaround is usually two to three business days. Many labs offer 24-hour or same-day rush analysis for an added fee.
Settle-plate kits from the hardware store almost always grow something because spores are everywhere. Without an outdoor control or measured air volume, the results can't tell you much.
There are no federal limits for indoor mold spores. Results are judged by comparing indoor samples with outdoor controls and looking for water-damage indicator species.
ERMI analyzes settled dust using DNA methods to identify mold species. It's sometimes used in health-related investigations, though most residential decisions rely on air and surface sampling.
We route testing calls from all over Denver to independent testers who work with accredited labs.
Zip codes covered in Denver include 80264 80266 80230 80231 80236 80237 80235 80238 80239 80123 80249 80247 80246 80290 80293 80294 80218 80210 80212 80216 80221 80220 80223 80222 80224 80227 80219 80211 80209 80207 80206 80205 80204 80202 80203 80208 80217 80243 80244 80248 80250 80256 80257 80259 80261 80265 80271 80273 80274 80281 80291 80299.
Just outside Denver? Check the list below or call to confirm.
Check Coverage: +1-844-326-4757